Newsgroups: comp.sys.transputer
From: ijg@oiiag.demon.co.uk (Ian Gillingham)
Subject: Windows <--> Transputer Link
Organization: Oxford Instruments - IAG
Date: Tue, 12 Jul 1994 14:52:55 +0000
Message-ID: <774024775snz@oiiag.demon.co.uk>

Hello,

We have an instrument under development which uses a transputer 
network.

A Windows application will 'talk' to the instrument via a transputer link.  
We have decided to use a 'link to bus adapter card' based around the INMOS
CO12 chip.  I know of the ISERVER and WISERVER (Windows), but don't
know if they will do the job.  We have a custom command set and 
message transport protocol specified.  All we need to do now is to
send the messages down the link, from the PC (Windows 3.1 application and 
get status info back from the transputer application.

Any suggestions will be greatly appreciated.

-- 
=============================================================
Ian Gillingham                  Oxford Instruments
email: ijg@oiiag.demon.co.uk    Industrial Analysis Group
Tel  : +44 (0)235 532123        19/20 Nuffield Way
Fax  : +44 (0)235 535416        Abingdon
                                Oxon, UK    OX14 1TX
=============================================================

