Newsgroups: comp.sys.transputer
From: mic@impulse.demon.co.uk (Mark Cartlidge)
Reply-To: Mic@impulse.demon.co.uk
Subject: Re: IMS B419 / G300 parameters
Organization: Transtech Parallel Systems
Date: Mon, 20 Jun 1994 20:17:13 +0000
Message-ID: <772143433snz@impulse.demon.co.uk>

In article <2tmvas$nqm@ratatosk.uninett.no>
           rolf.skeie@ffi.no "Rolf Skeie" writes:

>I'm having some trouble with programming the G300-chip for standard
>PAL/SECAM video format. Is this possible at all?
>Is there anyone out there that can help me with some sample
>parameters for different video-resolutions? (1024x768 SVGA
>would be nice, to)
>I have the F003 2D-library, but only a 1280x1024 Hitachi monitor
>is given as an example. Not enough...

I seem to remember that the B419 needs a PAL change to be able to get down to
the pixel clock rates of PAL/SECAM. Their is a couple of techncial notes on
this subject published by Inmos, probably in the SGS-thomson Image Processing
Applications Handbook.

Good Luck
Mark Cartlidge

-- 
 Transtech Parallel Systems                       Tel:   +44 (0)494-464303
 17-19 Manor Court Yard,                          Fax:   +44 (0)494-463686
 Hughenden Avenue, High Wycombe,                email: mic@impulse.demon.co.uk
 Bucks, HP13 5RE.                               email: sales@transtech.co.uk

