Newsgroups: comp.sys.transputer
From: ronald@dutepp13.et.tudelft.nl (Ronald in 't veld)
Subject: HELP WANTED!
Organization: Delft University of Technology, Dept. of Electrical Engineering
Date: 24 May 1994 16:15:47 GMT
Message-ID: <2rt97j$3pg@liberator.et.tudelft.nl>

Recently I started working with 4 805 Transputers fitted to a Paratech
Solutions Limited PSM004-3 PC card. A connector on the back of this thing
allows the transputer links to be connected.

I use the native C compiler by InMos, together with IServer.

The problem begins when I connect the links. All the edgelinks and
somethink called the pipetail link can be connected to each other without
any problems.  But when I connect the pipehead link, the problems begin.

Single transputer programs without a configuration file work fine.
Multitransputer programs however don't work, even when they don't use the
pipehead link (this is the Host transputer's link 0). When I attempt to
start a multitransputer program, IServer reports: Cannot send byte 1045 to
host.

Suggestions anyone?

